TIME BREAKDOWN PER MAXIMUM LOAD OF CLOTHES

• PREWASH  = 5 MIN. PLUS FILL TIME
• WASH TIME  = UP TO 15 MIN. PLUS FILL TIME
• RINSE TIME = TWO 5 MIN. RINSES PLUS FILL TIME
• SPIN TIME  = 5 MIN.
• DECAKE/INDEX TIME  = 3 MIN.

(Fill time is determined by water inlet pressure)

     WATER USE PER LOAD IN EACH CYCLE

     NORMAL HOT TO COLD USAGE

(THIS IS DIRECTLY RELATED TO THE TEMPERATURE AND WATER LEVEL SELECTION

CLOTHES CAPACITY PER LOAD
18 LB.

DETERGENT USE PER NORMAL LOAD
1 OZ. MAX

WATTS OF ELECTRICITY PER LOAD
110-150 WATT HOURS

MOTOR TYPE
UNIVERSAL/DIGITAL-ELECTRONICALLY CONTROLLED MOTOR

MOTOR H.P. RATING
LESS THAN �

MOTOR AMPS BEING DRAWN IN WASH
~ 4 TO ~ 5 AMPS

MOTOR AMPS BEING DRAWN DURING SPIN
~ 2 AMPS

SPIN CYCLE RPM
~ 400 (DELICATE & PERM)
~ 600 up to 850  (NORMAL)

EXTRACTION FORCE
~ 200 G's

TYPE OF DRAIN CYCLE
SELF CLEANING ELECTRIC WATER PUMP

THE INNER DRUM DIAMETER
~ 23" GIVING ~ 2 CUBIC FEET OF USABLE  VOLUME

INNER & OUTER TUB MATERIAL
STAINLESS STEEL

AUTOMATIC DISPENSERS
PREWASH DETERGENT, DETERGENT, BLEACH,  SOFTENER

SIZE OF MACHINE IN INCHES
WIDTH  = 27
DEPTH  = 26
BACK HEIGHT  = 42
HEIGHT WITH DOOR UP = 55

MACHINE WEIGHT
NET  = 175 LBS.
SHIPPING = 200 LBS.

MAINTENANCE AND REPAIR
The unit comes with a manufacturer's warranty on parts. The Staber System 2000 is designed to be serviced by the end user. If you can use a screwdriver you can service this machine. Total front access and simple design allows the user to maintain and service their machine without having to pay large repair bills or contract for a service policy. The manufacurer offers a toll-free Technical Assistance Hotline for guidance on do-it-yourself maintenance and repair. All replacement parts if needed, are shipped factory direct by FedEx or UPS to the end user.

WARRANTY
Length of Warranty From Date of Installation

• One Year Full Warranty
• Five Year Limited Warranty
• Ten Year Limited Warranty
• Twenty-Five Year Limited Warranty

Manufacturer will pay for:

• One Year: Replacement parts and repair labor to correct defects in materials or workmanship.
• Five Year: Replacement parts for the Bearing Assembly and Suspension System if defective in materials or workmanship.
• Ten Year: Replacement of the Top, Lid, or Base if defective in materials or workmanship.
• Twenty-Five Year: Replacement parts and repair labor for the Outer Tub Module if the tub develops a water leak caused by rust-through as a result of defective materials or workmanship.