|
|
|
|
• |
TrendSetter Solar Water Heater
|
|
|
|
AP Solar Collector General Specifications
|
| Manifold Casing Material |
Aluminum (grade 3A21)
|
| Frame Material |
1.5mm 304 Stainless Steel
|
| Header Pipe Material |
99.93% pure Copper & lead free 45% silver brazing
|
| Insulation |
Compressed Glass Wool - K = 0.043W/mK
|
| Rubber Seals and Rings |
HTV grade silicone rubber
|
| Optimal installation angle |
20-70o Vertical, -5o to +5o Horizontal
|
| Maximum Operating Pressure |
8bar - 116psi
|
| Optimal flow rate |
0.1L/min/tube - 0.026G/min/tube
|
| Performance Data (SPF) |
Conversion Factor: ho = 0.717
Loss Coefficients: a1 = 1.52, a2 = 0.0085
|
|
Model Specifications
|
|
Model
|
AP-Demo
|
AP-10
|
AP-20
|
AP-22
|
AP-30
|
| Overall Length (mm / inch) 1 |
660 / 25.9"
|
1980 / 77.9"
|
| Overall Width (mm / inch) |
376 / 14.8"
|
796 / 31.3"
|
1496 / 58.8"
|
1636 / 64.4"
|
2196 / 86.4"
|
| Overall Height (mm / inch) |
156 / 6.1" (including flush roof mounting frame)
|
| Absorber Area (m2 / ft2)2 |
0.08 / 0.86
|
0.8 / 8.6
|
1.6 / 17.2
|
1.76 / 18.9
|
2.4 / 25.8
|
| Fluid Capacity (ml / ounces) |
190 / 6.4
|
290 / 9.8
|
510 / 17.2
|
550 / 18.6
|
833 / 28.2
|
| Gross Area (m2 / ft2)3 |
0.25 / 2.67
|
1.57 / 16.95
|
2.96 / 31.8
|
3.24 / 34.8
|
4.35 / 46.8
|
| Dry Weight (kg / pounds) |
8 / 18
|
35 / 77
|
64 / 140
|
71 / 157
|
95 / 209
|
1. Length and width do not include the inlet and outlet which protrude from either the rear or ends of the manifold.
2. Absorber area calculated as: D x L x N where:
- D = diameter of the absorber tube, in this case 0.047m
- L = exposed length of tube: For 1.8m tubes this is 1.72m
- N = number of tubes (4, 10, 20, 22, 30)
- Eg. 0.047 x 1.72 x 20 = 1.6m2 absorber area (1m2 = 10.76ft2)
3. Calculated simply as overall length (including frame) x overall width.
4. AP Models are named as follows:
AP(Manifold Casing Color)(Port Location) - (Tube Number)
- Manifold Casing Material: K = Black, S = Silver
- Port Location: R = Rear, E = End
- Tube Number: 4, 10, 20, 22, 30
Eg. APKR-20 = black rear port 20 tube manifold.
|
|
|
|
|
|
|
